Intralox Series 2400 Radius belt

Series 2400 Tight Turning Radius Belt conveys product around corners as tight as 1.7 times the belt width, while Series 2400 Radius Belt makes turns as tight as 2.2 times the belt width. The two belts share basic design elements and run on the same sprockets. The Tight Turning Radius Belt achieves tighter turns due to special edge modules which collapse tighter in turns. These tight turning modules may be installed on one or both sides of the belt.

Both Series 2400 Radius Belts offer versatility in conveyor design, the ability to conserve floorspace, and the option of creating longer runs -- thanks to the significant strength of the belts. Longer runs on a continuous conveyor can help reduce startup and operating costs, and potentially eliminate product-damaging transfer points. When transfers are necessary, the small, 1.0" (25.4 mm) pitch allows for the gentle transfer of delicate, loose or packaged product. The versatility of the belt is bolstered by the availability of flights and friction top modules, allowing the belt to perform in incline and decline applications.

With a belt thickness of 0.50" (12.5 mm), the Series 2400 Tight Turning Radius belt is robust, with substantial strength in both turns and straight runs. The belt performs exceptionally well, even in demanding packaged goods and bulk product applications.

The flush grid surface of the belt provides 42% open area. This allows for airflow in applications where a warm product must cool prior to packaging and drainage when conveying wet product. The open area also contributes to fast, thorough clean up, while still providing an operator-friendly surface. The easy-to-clean design makes it an excellent choice for food processors who are faced with increasingly stringent sanitation demands.

Intralox, Inc., 201 Laitram Lane, Harahan, LA 70123. Tel: 800-535-8848; Fax: 504-734-0063.